paste #sRio :: 2018-04-11T18:31:39Z ::
new ::
raw
[ 0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[ 0.000000] Linux version 4.15.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-12)) #1 SMP Debian 4.15.11-1 (2018-03-20)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.0-2-amd64 root=/dev/mapper/debian--vg-root ro pci=nomsi,noaer net.ifnames=0 quiet acpi=off
[ 0.000000] Intel Spectre v2 broken microcode detected; disabling Speculation Control
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009b800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000073011fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000073012000-0x0000000073012fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000073013000-0x000000007303cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007303d000-0x0000000073093fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000073094000-0x00000000735a4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000735a5000-0x00000000768cffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000768d0000-0x000000007732cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007732d000-0x00000000774cffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000774d0000-0x0000000077b7afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077b7b000-0x0000000077ffdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077ffe000-0x0000000077ffefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000281ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. GL62 6QE/MS-16J5, BIOS E16J5IMS.114 04/29/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x282000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask 7F80000000 uncachable
[ 0.000000] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.000000] 2 base 007A000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 0079000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 0078800000 mask 7FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: last_pfn = 0x77fff max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcc10-0x000fcc1f] mapped at [ (ptrval)]
[ 0.000000] Base memory trampoline at [ (ptrval)] 95000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x192620000, 0x192620fff] PGTABLE
[ 0.000000] BRK [0x192621000, 0x192621fff] PGTABLE
[ 0.000000] BRK [0x192622000, 0x192622fff] PGTABLE
[ 0.000000] BRK [0x192623000, 0x192623fff] PGTABLE
[ 0.000000] BRK [0x192624000, 0x192624fff] PGTABLE
[ 0.000000] BRK [0x192625000, 0x192625fff] PGTABLE
[ 0.000000] BRK [0x192626000, 0x192626fff] PGTABLE
[ 0.000000] BRK [0x192627000, 0x192627fff] PGTABLE
[ 0.000000] BRK [0x192628000, 0x192628fff] PGTABLE
[ 0.000000] BRK [0x192629000, 0x192629fff] PGTABLE
[ 0.000000] BRK [0x19262a000, 0x19262afff] PGTABLE
[ 0.000000] BRK [0x19262b000, 0x19262bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3405f000-0x36026fff]
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000281ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x281ffb000-0x281ffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000281ffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009afff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000073011fff]
[ 0.000000] node 0: [mem 0x000000007303d000-0x0000000073093fff]
[ 0.000000] node 0: [mem 0x00000000735a5000-0x00000000768cffff]
[ 0.000000] node 0: [mem 0x000000007732d000-0x00000000774cffff]
[ 0.000000] node 0: [mem 0x0000000077ffe000-0x0000000077ffefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000281ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000281ffffff]
[ 0.000000] On node 0 totalpages: 2065618
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3994 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7509 pages used for memmap
[ 0.000000] DMA32 zone: 480568 pages, LIFO batch:31
[ 0.000000] Normal zone: 24704 pages used for memmap
[ 0.000000] Normal zone: 1581056 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 102 pages
[ 0.000000] Reserving Intel graphics memory at 0x0000000079000000-0x000000007cffffff
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: MEGABOOK
[ 0.000000] MPTABLE: Product ID: MSI_NB
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #2
[ 0.000000] Processor #4
[ 0.000000] Processor #6
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] Processors: 4
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73012000-0x73012fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73013000-0x7303cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x73094000-0x735a4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x768d0000-0x7732cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x774d0000-0x77b7afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77b7b000-0x77ffdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77fff000-0x77ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x79000000-0x7cffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7d000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x7d000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s142040 r8192 d29992 u524288
[ 0.000000] pcpu-alloc: s142040 r8192 d29992 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2033320
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.15.0-2-amd64 root=/dev/mapper/debian--vg-root ro pci=nomsi,noaer net.ifnames=0 quiet acpi=off
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8009320K/8262472K available (10252K kernel code, 1165K rwdata, 3084K rodata, 1516K init, 692K bss, 253152K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 29537 entries in 116 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.024000] tsc: Detected 2300.000 MHz processor
[ 0.024000] tsc: Detected 2304.000 MHz TSC
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4608.00 BogoMIPS (lpj=9216000)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.024000] AppArmor: AppArmor initialized
[ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.024000] CPU: Physical Processor ID: 0
[ 0.024000] CPU: Processor Core ID: 0
[ 0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024000] mce: CPU supports 10 MCE banks
[ 0.024000] CPU0: Thermal monitoring enabled (TM1)
[ 0.024000] process: using mwait in idle threads
[ 0.024000] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.024000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.024000] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024000] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.024000] Freeing SMP alternatives memory: 28K
[ 0.024000] TSC deadline timer enabled
[ 0.024000] smpboot: CPU0: Intel(R) Core(TM) i5-6300HQ CPU @ 2.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.024000] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.024000] ... version: 4
[ 0.024000] ... bit width: 48
[ 0.024000] ... generic registers: 8
[ 0.024000] ... value mask: 0000ffffffffffff
[ 0.024000] ... max period: 00007fffffffffff
[ 0.024000] ... fixed-purpose events: 3
[ 0.024000] ... event mask: 00000007000000ff
[ 0.024000] Hierarchical SRCU implementation.
[ 0.024000] smp: Bringing up secondary CPUs ...
[ 0.024000] x86: Booting SMP configuration:
[ 0.024000] .... node #0, CPUs: #1
[ 0.024046] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.024046] #2 #3
[ 0.029653] smp: Brought up 1 node, 4 CPUs
[ 0.029653] smpboot: Max logical packages: 1
[ 0.029653] smpboot: Total of 4 processors activated (18432.00 BogoMIPS)
[ 0.032185] devtmpfs: initialized
[ 0.032185] x86/mm: Memory block size: 128MB
[ 0.032566] PM: Registering ACPI NVS region [mem 0x73012000-0x73012fff] (4096 bytes)
[ 0.032566] PM: Registering ACPI NVS region [mem 0x774d0000-0x77b7afff] (6991872 bytes)
[ 0.032566] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.032566] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.032566] pinctrl core: initialized pinctrl subsystem
[ 0.033192] NET: Registered protocol family 16
[ 0.033265] audit: initializing netlink subsys (disabled)
[ 0.033269] audit: type=2000 audit(1523466549.032:1): state=initialized audit_enabled=0 res=1
[ 0.033269] cpuidle: using governor ladder
[ 0.033269] cpuidle: using governor menu
[ 0.033269] PCI: Using configuration type 1 for base access
[ 0.033269] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.033269] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.033269] ACPI: Interpreter disabled.
[ 0.033269] vgaarb: loaded
[ 0.033269] EDAC MC: Ver: 3.0.0
[ 0.033269] PCI: Probing PCI hardware
[ 0.033269] PCI: root bus 00: using default resources
[ 0.033269] PCI: Probing PCI hardware (bus 00)
[ 0.033269] PCI host bridge to bus 0000:00
[ 0.033269] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.033269] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[ 0.033269] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.033269] pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
[ 0.033269] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.033269] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.033269] pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
[ 0.033269] pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
[ 0.033269] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.033269] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.033269] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.033269] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.033269] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.033269] pci 0000:00:14.0: reg 0x10: [mem 0xdf310000-0xdf31ffff 64bit]
[ 0.033269] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.033269] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.033269] pci 0000:00:14.2: reg 0x10: [mem 0xdf32e000-0xdf32efff 64bit]
[ 0.033269] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.033269] pci 0000:00:16.0: reg 0x10: [mem 0xdf32d000-0xdf32dfff 64bit]
[ 0.033269] pci 0000:00:16.0: PME# supported from D3hot
[ 0.033269] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[ 0.033269] pci 0000:00:17.0: reg 0x10: [mem 0xdf328000-0xdf329fff]
[ 0.033269] pci 0000:00:17.0: reg 0x14: [mem 0xdf32c000-0xdf32c0ff]
[ 0.033269] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.033269] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.033269] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.033269] pci 0000:00:17.0: reg 0x24: [mem 0xdf32b000-0xdf32b7ff]
[ 0.036021] pci 0000:00:17.0: PME# supported from D3hot
[ 0.036058] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.036104] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.036139] pci 0000:00:1c.3: [8086:a113] type 01 class 0x060400
[ 0.036184] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.036230] pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
[ 0.036352] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.036366] pci 0000:00:1f.2: reg 0x10: [mem 0xdf324000-0xdf327fff]
[ 0.036438] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.036464] pci 0000:00:1f.3: reg 0x10: [mem 0xdf320000-0xdf323fff 64bit]
[ 0.036493] pci 0000:00:1f.3: reg 0x20: [mem 0xdf300000-0xdf30ffff 64bit]
[ 0.036536] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.036570] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.036629] pci 0000:00:1f.4: reg 0x10: [mem 0xdf32a000-0xdf32a0ff 64bit]
[ 0.036698] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.036814] pci 0000:01:00.0: [10de:139a] type 00 class 0x030200
[ 0.036822] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.036829] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.036836] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.036840] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.036845] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.048037] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.048039] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.048041] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.048043] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.048094] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000
[ 0.048131] pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf201fff 64bit]
[ 0.048279] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.048327] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.048331] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.048371] pci 0000:03:00.0: [1969:10a1] type 00 class 0x020000
[ 0.048395] pci 0000:03:00.0: reg 0x10: [mem 0xdf100000-0xdf13ffff 64bit]
[ 0.048405] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.048498] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.048537] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.048539] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.048541] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.048555] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
[ 0.048572] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:a14e]
[ 0.048574] PCI: pci_cache_line_size set to 64 bytes
[ 0.048613] e820: reserve RAM buffer [mem 0x0009b800-0x0009ffff]
[ 0.048614] e820: reserve RAM buffer [mem 0x73012000-0x73ffffff]
[ 0.048615] e820: reserve RAM buffer [mem 0x73094000-0x73ffffff]
[ 0.048616] e820: reserve RAM buffer [mem 0x768d0000-0x77ffffff]
[ 0.048617] e820: reserve RAM buffer [mem 0x774d0000-0x77ffffff]
[ 0.048618] e820: reserve RAM buffer [mem 0x77fff000-0x77ffffff]
[ 0.048619] e820: reserve RAM buffer [mem 0x282000000-0x283ffffff]
[ 0.048693] clocksource: Switched to clocksource refined-jiffies
[ 0.055177] VFS: Disk quotas dquot_6.6.0
[ 0.055188] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.055258] AppArmor: AppArmor Filesystem Enabled
[ 0.055264] pnp: PnP ACPI: disabled
[ 0.056049] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.056051] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.056053] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.056055] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.056059] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.056061] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf2fffff]
[ 0.056066] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.056068] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.056071] pci 0000:00:1c.3: bridge window [mem 0xdf100000-0xdf1fffff]
[ 0.056076] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.056077] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[ 0.056078] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.056079] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.056081] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.056082] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
[ 0.056083] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.056084] pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
[ 0.056106] NET: Registered protocol family 2
[ 0.056196] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.056284] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.056421] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.056443] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.056465] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.056506] NET: Registered protocol family 1
[ 0.056516] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.056524] pci 0000:00:14.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.056857] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.056860] PCI: CLS 0 bytes, default 64
[ 0.056884] Unpacking initramfs...
[ 0.506548] Freeing initrd memory: 32544K
[ 0.506554] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.506557] software IO TLB [mem 0x6f012000-0x73012000] (64MB) mapped at [0000000038d4c97f-00000000d2dc61e2]
[ 0.506588] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2135f7c97c8, max_idle_ns: 440795273205 ns
[ 0.506606] clocksource: Switched to clocksource tsc
[ 0.506630] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.506638] Initialise system trusted keyrings
[ 0.506638] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.506638] zbud: loaded
[ 0.735891] Key type asymmetric registered
[ 0.735892] Asymmetric key parser 'x509' registered
[ 0.735913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.735930] io scheduler noop registered
[ 0.735931] io scheduler deadline registered
[ 0.735957] io scheduler cfq registered (default)
[ 0.735958] io scheduler mq-deadline registered
[ 0.736011] pcieport 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.736048] pcieport 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 0.736086] pcieport 0000:00:1c.3: PCI->APIC IRQ transform: INT D -> IRQ 19
[ 0.736130] pcieport 0000:00:01.0: Signaling PME with IRQ 16
[ 0.736142] pcieport 0000:00:1c.0: Signaling PME with IRQ 16
[ 0.736151] pcieport 0000:00:1c.3: Signaling PME with IRQ 19
[ 0.736169] intel_idle: MWAIT substates: 0x11142120
[ 0.736170] intel_idle: v0.4.1 model 0x5E
[ 0.736172] intel_idle: state C8 is disabled
[ 0.736173] intel_idle: state C9 is disabled
[ 0.736289] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.736322] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.736537] Linux agpgart interface v0.103
[ 0.736594] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.736594] AMD IOMMUv2 functionality not available on this system
[ 0.736785] i8042: PNP: No PS/2 controller found.
[ 0.736785] i8042: Probing ports directly.
[ 0.992611] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.992938] mousedev: PS/2 mouse device common for all mice
[ 0.993414] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.993493] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[ 0.993500] intel_pstate: Intel P-state driver initializing
[ 0.993749] intel_pstate: HWP enabled
[ 0.994084] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.994813] NET: Registered protocol family 10
[ 1.001130] Segment Routing with IPv6
[ 1.001155] mip6: Mobile IPv6
[ 1.001157] NET: Registered protocol family 17
[ 1.001160] mpls_gso: MPLS GSO support
[ 1.001880] microcode: sig=0x506e3, pf=0x20, revision=0xc2
[ 1.002050] microcode: Microcode Update Driver: v2.2.
[ 1.002061] sched_clock: Marking stable (1002043086, 0)->(982910586, 19132500)
[ 1.002585] registered taskstats version 1
[ 1.002587] Loading compiled-in X.509 certificates
[ 1.003366] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.035479] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 1.035489] zswap: loaded using pool lzo/zbud
[ 1.035693] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.035695] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.035905] rtc_cmos rtc_cmos: setting system clock to 2018-04-11 17:09:10 UTC (1523466550)
[ 1.037284] Freeing unused kernel memory: 1516K
[ 1.037285] Write protecting the kernel read-only data: 16384k
[ 1.037861] Freeing unused kernel memory: 2012K
[ 1.039255] Freeing unused kernel memory: 1012K
[ 1.042480] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.042480] x86/mm: Checking user space page tables
[ 1.045911] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.113261] i801_smbus 0000:00:1f.4: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.113277] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 1.113297] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 1.113647] usbcore: registered new interface driver usbfs
[ 1.113653] usbcore: registered new interface driver hub
[ 1.113671] usbcore: registered new device driver usb
[ 1.116043] SCSI subsystem initialized
[ 1.119418] alx 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 19
[ 1.119419] xhci_hcd 0000:00:14.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.119450] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.119455] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.119869] libata version 3.00 loaded.
[ 1.120732] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 1.120738] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.120845] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.120847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.120848] usb usb1: Product: xHCI Host Controller
[ 1.120849] usb usb1: Manufacturer: Linux 4.15.0-2-amd64 xhci-hcd
[ 1.120850] usb usb1: SerialNumber: 0000:00:14.0
[ 1.120956] hub 1-0:1.0: USB hub found
[ 1.120976] hub 1-0:1.0: 16 ports detected
[ 1.121220] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.121222] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.121249] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.121250] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.121251] usb usb2: Product: xHCI Host Controller
[ 1.121252] usb usb2: Manufacturer: Linux 4.15.0-2-amd64 xhci-hcd
[ 1.121253] usb usb2: SerialNumber: 0000:00:14.0
[ 1.121372] hub 2-0:1.0: USB hub found
[ 1.121383] hub 2-0:1.0: 8 ports detected
[ 1.121552] ACPI: <n/a>: failed to evaluate _DSM (0x1001)
[ 1.121567] ahci 0000:00:17.0: version 3.0
[ 1.121573] ahci 0000:00:17.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 1.122310] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [4c:cc:6a:84:c4:02]
[ 1.122969] AVX2 version of gcm_enc/dec engaged.
[ 1.122970] AES CTR mode by8 optimization enabled
[ 1.132041] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0xd impl SATA mode
[ 1.132043] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.138455] alg: No test for pcbc(aes) (pcbc-aes-aesni)
[ 1.156520] scsi host0: ahci
[ 1.156826] scsi host1: ahci
[ 1.157140] scsi host2: ahci
[ 1.157316] scsi host3: ahci
[ 1.157350] ata1: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b100 irq 16
[ 1.157351] ata2: DUMMY
[ 1.157353] ata3: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b200 irq 16
[ 1.157354] ata4: SATA max UDMA/133 abar m2048@0xdf32b000 port 0xdf32b280 irq 16
[ 1.456123] usb 1-8: new low-speed USB device number 2 using xhci_hcd
[ 1.472120] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.472148] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.472982] ata1.00: ATA-10: ADATA SU800NS38, P0925A, max UDMA/133
[ 1.472987] ata1.00: 250069680 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
[ 1.473052] ata4.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
[ 1.473057] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.473201] ata1.00: READ LOG DMA EXT failed, trying PIO
[ 1.473204] ata1.00: failed to get Identify Device Data, Emask 0x40
[ 1.473212] ata1.00: failed to set xfermode (err_mask=0x40)
[ 1.608571] usb 1-8: New USB device found, idVendor=045e, idProduct=0782
[ 1.608576] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.608580] usb 1-8: Product: Microsoft USB Optical Mouse
[ 1.608583] usb 1-8: Manufacturer: PixArt
[ 1.614182] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.617361] usbcore: registered new interface driver usbhid
[ 1.617361] usbhid: USB HID core driver
[ 1.618080] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:045E:0782.0001/input/input1
[ 1.618136] hid-generic 0003:045E:0782.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:14.0-8/input0
[ 1.736111] usb 1-10: new full-speed USB device number 3 using xhci_hcd
[ 1.885898] usb 1-10: New USB device found, idVendor=8087, idProduct=0a2a
[ 1.885903] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.012111] usb 1-11: new high-speed USB device number 4 using xhci_hcd
[ 2.191341] usb 1-11: New USB device found, idVendor=5986, idProduct=0683
[ 2.191346] usb 1-11: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.191350] usb 1-11: Product: BisonCam, NB Pro
[ 2.191353] usb 1-11: Manufacturer: Bison
[ 2.191356] usb 1-11: SerialNumber: 200901010001
[ 2.320113] usb 1-12: new high-speed USB device number 5 using xhci_hcd
[ 2.469179] usb 1-12: New USB device found, idVendor=0bda, idProduct=0129
[ 2.469184] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.469187] usb 1-12: Product: USB2.0-CRW
[ 2.469191] usb 1-12: Manufacturer: Generic
[ 2.469194] usb 1-12: SerialNumber: 20100201396000000
[ 2.476979] usbcore: registered new interface driver rtsx_usb
[ 6.624289] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.625033] ata4.00: configured for UDMA/133
[ 6.627025] ata3.00: ATAPI: HL-DT-ST DVDRAM GUD0N, 1.00, max UDMA/133
[ 6.631809] ata3.00: configured for UDMA/133
[ 6.940116] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.941789] ata1.00: configured for UDMA/133
[ 6.942210] scsi 0:0:0:0: Direct-Access ATA ADATA SU800NS38 5A PQ: 0 ANSI: 5
[ 6.946115] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GUD0N 1.00 PQ: 0 ANSI: 5
[ 6.974064] scsi 3:0:0:0: Direct-Access ATA WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
[ 6.981553] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 6.981571] sd 0:0:0:0: [sda] Write Protect is off
[ 6.981575] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.981619] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.981736] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 6.981740] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[ 6.981757] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.981761] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.981828] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.982837] sda: sda1 sda2 < sda5 >
[ 6.983403] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.015726] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.015730] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.016053] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 7.369304] sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[ 7.370914] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 8.220677] device-mapper: uevent: version 1.0.3
[ 8.220852] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 10.848227] random: crng init done
[ 19.617269] NET: Registered protocol family 38
[ 19.897168] PM: Starting manual resume from disk
[ 19.897359] PM: Image not found (code -22)
[ 20.140991] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.477415] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.491491] systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 20.508510] systemd[1]: Detected architecture x86-64.
[ 20.514343] systemd[1]: Set hostname to <debian>.
[ 20.735441] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 20.735714] systemd[1]: Listening on Journal Socket.
[ 20.735842] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 20.737682] systemd[1]: Created slice system-tor.slice.
[ 20.738201] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 20.738595] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 20.738711] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 20.780717] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[ 20.817448] lp: driver loaded but no devices found
[ 20.819543] ppdev: user-space parallel port driver
[ 20.841133] systemd-journald[344]: Received request to flush runtime journal from PID 1
[ 21.038570] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 21.044503] iTCO_vendor_support: vendor-support=0
[ 21.046291] intel_pch_thermal 0000:00:14.2: PCI->APIC IRQ transform: INT C -> IRQ 18
[ 21.046351] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 21.047196] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.048224] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 21.048341] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[ 21.048940] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.056705] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 21.057296] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 21.057320] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 21.060090] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 21.060096] mei_me 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 21.070861] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 21.070862] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 21.070863] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 21.070863] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 21.070864] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 21.070864] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 21.101617] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 21.101803] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 21.105740] snd_hda_intel 0000:00:1f.3: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 21.106878] platform regulatory.0: firmware: failed to load regulatory.db (-2)
[ 21.106970] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 21.107079] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 21.107080] cfg80211: failed to load regulatory.db
[ 21.165639] i915: Unknown symbol acpi_lid_notifier_register (err 0)
[ 21.166441] i915: Unknown symbol acpi_lid_notifier_unregister (err 0)
[ 21.166600] i915: Unknown symbol acpi_lid_open (err 0)
[ 21.189678] media: Linux media interface: v0.10
[ 21.190399] snd_hda_intel 0000:00:1f.3: failed to add i915 component master (-19)
[ 21.190484] Intel(R) Wireless WiFi driver for Linux
[ 21.190485] Copyright(c) 2003- 2015 Intel Corporation
[ 21.190522] iwlwifi 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 21.190562] iwlwifi 0000:02:00.0: pci_enable_msi failed - -22
[ 21.197947] Linux video capture interface: v2.00
[ 21.214524] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-29.ucode
[ 21.214888] iwlwifi 0000:02:00.0: loaded firmware version 29.541020.0 op_mode iwlmvm
[ 21.226389] intel_rapl: Found RAPL domain package
[ 21.226391] intel_rapl: Found RAPL domain core
[ 21.226391] intel_rapl: Found RAPL domain uncore
[ 21.226392] intel_rapl: Found RAPL domain dram
[ 21.232477] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0683)
[ 21.235547] uvcvideo 1-11:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 21.235548] uvcvideo 1-11:1.0: Entity type for entity Extension 4 was not initialized!
[ 21.235549] uvcvideo 1-11:1.0: Entity type for entity Processing 2 was not initialized!
[ 21.235550] uvcvideo 1-11:1.0: Entity type for entity Camera 1 was not initialized!
[ 21.235655] input: BisonCam, NB Pro: BisonCam, NB as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input3
[ 21.235972] usbcore: registered new interface driver uvcvideo
[ 21.235973] USB Video Class driver (1.1.1)
[ 21.241409] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=3 (0x15/0x1b/0x1a/0x0/0x0) type:speaker
[ 21.241411] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.241412] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 21.241413] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 21.241414] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 21.241414] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 21.241416] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 21.241417] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 21.251996] Adding 8261628k swap on /dev/mapper/debian--vg-swap_1. Priority:-2 extents:1 across:8261628k SSFS
[ 21.271814] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[ 21.273242] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[ 21.276905] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[ 21.276942] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 21.276972] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 21.289310] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210
[ 21.291152] Bluetooth: Core ver 2.22
[ 21.291159] NET: Registered protocol family 31
[ 21.291160] Bluetooth: HCI device and connection manager initialized
[ 21.291162] Bluetooth: HCI socket layer initialized
[ 21.291164] Bluetooth: L2CAP socket layer initialized
[ 21.291167] Bluetooth: SCO socket layer initialized
[ 21.305925] usbcore: registered new interface driver btusb
[ 21.306366] iwlwifi 0000:02:00.0: base HW address: 58:fb:84:6f:03:38
[ 21.319912] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 21.324961] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 21.324963] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 21.373046] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 21.373211] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 21.373222] thermal thermal_zone2: failed to read out thermal zone (-61)
[ 21.438571] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 21.597329] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 21.600860] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 21.600925] Bluetooth: hci0: Intel firmware patch completed and activated
[ 21.704146] audit: type=1400 audit(1523466571.168:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=639 comm="apparmor_parser"
[ 21.704153] audit: type=1400 audit(1523466571.168:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=639 comm="apparmor_parser"
[ 21.704158] audit: type=1400 audit(1523466571.168:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=639 comm="apparmor_parser"
[ 21.705071] audit: type=1400 audit(1523466571.168:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=641 comm="apparmor_parser"
[ 21.705249] audit: type=1400 audit(1523466571.168:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="system_tor" pid=637 comm="apparmor_parser"
[ 21.709615] audit: type=1400 audit(1523466571.172:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=644 comm="apparmor_parser"
[ 21.710101] audit: type=1400 audit(1523466571.172:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=642 comm="apparmor_parser"
[ 21.717689] audit: type=1400 audit(1523466571.180:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=643 comm="apparmor_parser"
[ 21.717695] audit: type=1400 audit(1523466571.180:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=643 comm="apparmor_parser"
[ 21.718890] audit: type=1400 audit(1523466571.180:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=646 comm="apparmor_parser"
[ 21.843410] bbswitch: loading out-of-tree module taints kernel.
[ 21.844055] bbswitch: version 0.8
[ 21.844058] bbswitch: cannot find ACPI handle for VGA device 0000:00:02.0
[ 21.844061] bbswitch: cannot find ACPI handle for VGA device 0000:01:00.0
[ 21.844062] bbswitch: No discrete VGA device found
[ 21.967311] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.967312] Bluetooth: BNEP filters: protocol multicast
[ 21.967315] Bluetooth: BNEP socket layer initialized
[ 22.335487] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.335521] alx 0000:03:00.0 eth0: Enabling MSI-X interrupts failed!
[ 22.336703] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.999499] ipmi message handler version 39.2
[ 23.000218] ipmi device interface
[ 23.061641] nvidia: module license 'NVIDIA' taints kernel.
[ 23.061642] Disabling lock debugging due to kernel taint
[ 23.075049] nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[ 23.075233] nvidia 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
[ 23.075562] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 390.48 Thu Mar 22 00:42:57 PDT 2018 (using threaded interrupts)
[ 23.076994] NVRM: failed to register with the ACPI subsystem!
[ 23.119370] NVRM: failed to unregister from the ACPI subsystem!
[ 25.590805] NVRM: failed to register with the ACPI subsystem!
[ 25.647858] NVRM: failed to unregister from the ACPI subsystem!
[ 25.699761] NVRM: failed to register with the ACPI subsystem!
[ 30.630362] Bluetooth: RFCOMM TTY layer initialized
[ 30.630373] Bluetooth: RFCOMM socket layer initialized
[ 30.630381] Bluetooth: RFCOMM ver 1.11
[ 41.404631] fuse init (API version 7.26)
[ 43.846289] rfkill: input handler disabled
[ 80.500398] usb 1-8: reset low-speed USB device number 2 using xhci_hcd
[ 179.833125] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 183.550183] wlan0: authenticate with f4:f2:6d:6f:6a:9e
[ 183.556058] wlan0: send auth to f4:f2:6d:6f:6a:9e (try 1/3)
[ 183.558971] wlan0: authenticated
[ 183.560083] wlan0: associate with f4:f2:6d:6f:6a:9e (try 1/3)
[ 183.564062] wlan0: RX AssocResp from f4:f2:6d:6f:6a:9e (capab=0x431 status=0 aid=6)
[ 183.567266] wlan0: associated
[ 183.597892] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 233.652311] usb 1-8: reset low-speed USB device number 2 using xhci_hcd
[ 540.707097] usb 1-8: reset low-speed USB device number 2 using xhci_hcd
[ 1279.186122] usb 1-8: USB disconnect, device number 2
[ 1283.238296] usb 1-8: new low-speed USB device number 6 using xhci_hcd
[ 1283.389991] usb 1-8: New USB device found, idVendor=045e, idProduct=0782
[ 1283.389993] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1283.389994] usb 1-8: Product: Microsoft USB Optical Mouse
[ 1283.389995] usb 1-8: Manufacturer: PixArt
[ 1283.393317] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:045E:0782.0002/input/input7
[ 1283.450700] hid-generic 0003:045E:0782.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:14.0-8/input0